|
|
Properties of asphalt mixtures with RAP
Trnka, Lukáš ; Coufalíková, Iva (referee) ; Dašek, Ondřej (advisor)
The bachelor thesis deals with the properties of asphalt mixtures with reclaimed asphalt. Possibilities of rejuvenate of binder contained in reclaimed asphalt are mentioned in the theoretical part. There is explained the principle of rejuvenators function, types of rejuvenators and ways of rejuvenators dosing into the asphalt mixture. The procedures for performing the stiffness modulus test (2PB-TR) and the low temperature (TSRST) test are described in the following part. Individual tests are evaluated and asphalt mixtures are compared in the practical part of bachelor thesis.
|
|
|
Stone mastic asphalts with recycled materials - bituminous binders properties
Dzurková, Veronika ; Coufalíková, Iva (referee) ; Hýzl, Petr (advisor)
The bachelor thesis is focused on the issue of adding R-material to stone mastic asphalt mixtures (SMA). The material was obtained from a plant that put the mixture in the test section on the road II/227. The theoretical part describes the problems of recycling of asphalt roads, bituminal binder theory and problems associated with the addition of R-material to hot asphalt mixtures. Bituminal binders from mixtures with different percentages of R-material were extracted in the practical part. Empirical and functional tests were performed on these binders. The aim of the thesis is to determine the influence of the presence of R-material on SMA asphalt mixture in terms of properties of asphalt binder.
|
|
|
Cold asphalt mixtures
Spáčil, Petr ; Hýzl, Petr (referee) ; Dašek, Ondřej (advisor)
The bachelor thesis is divided into theoretical and practical part. The theoretical part consists of explanation of the problem. The thesis includes definitions as Bitumen, Asphalt Mixture, Asphalt Binder, Cut-back Bitumen and Viscosity. The practical part is focused mainly on the description of the test methods used on Asphalt Binders and Mixtures which were intended for repairs. It describes differences between used Asphalt Binders and explains and describes other used materials. The practical part compares the mixtures of different Cut-back Bitumen. It describes the production process and project of Cut-back bitumen mixture, the production process of individual test solids and compares the differences with hot made asphalt mixture. It also describes the analysis of volumetric, mechanical-physical and funcional tests in purpose of evaluating the differences between standard Cut-back Bitumen and new biofluxed asphalt binder.
|
|
|
Use of R-material in asphalt mixtures with PMB type binder
Navrátilová, Pavlína ; Dašek, Ondřej (referee) ; Hýzl, Petr (advisor)
The diploma thesis is focused on the use of R-material in asphalt mixtures with a PMB type binder. The work is divided into a theoretical part and a practical part. The theoretical part describes the acquisition of R-material by road milling, the use of R-material, the binder used in the practical part of the work and the types of recycling. The practical part deals with the design of four types of asphalt mixtures with different content of R-material in the asphalt mixture. It also deals with the description of functional tests of asphalt mixtures and the results of these tests.
|
|
|
Dosage of rejuvenating agents to asphalt mixture with high content of RAP
Čumíčková, Markéta ; Coufalíková, Iva (referee) ; Dašek, Ondřej (advisor)
The diploma thesis is focused on the appropriate dosage of rejuvenating agents in asphalt mixtures with high content of RAP. The empirical and functional laboratory tests are described in the theoretical part. The practical part deals with the estimation of the optimal amount of rejuvenating agents by means of laboratory tests so that the rheological properties of the degraded asphalt binder can be restored by suitable dosing into the RAP. As part of the TAČR ZÉTA project, an experimental section of asphalt mixture containing 50 % of the RAP and an appropriate amount of the rejuvenating agents was created. The aim of the thesis is to find an optimal dosage of the rejuvenating agents in the samples of the RAP and laboratory aged asphalt binder of gradation 50/70, to determine the effectiveness of selected rejuvenating agents and to monitor changes in the parameters of the experimental section during the period of time.
|
|
|
The evaluation of properties of fine aggregate for asphalt mixtures
Kadlček, Jakub ; Sychra, Martin (referee) ; Dašek, Ondřej (advisor)
The diploma thesis is focused on evaluation of properties of fine aggregate by means of laboratory tests. Fine aggregate evaluation was performed using sieving test, laser diffraction, delta ring and ball test, bitumen number test, uncompacted void content of fine aggregate according to AASHTO T 304, voids of dry compacted filler (Rigden) test and particle density of filler. Laboratory research has led to the discovery of some properties of fine aggregate and their dependencies.
|
|
|
Joint sealings of concrete pavements
Doseděl, Jan ; Hýzl, Petr (referee) ; Stehlík, Dušan (advisor)
The findings related to issues of joint sealings of concrete pavements are summarized in this bachelor thesis. The main part of this thesis deals with experimental testing of modified asphalt binder. This asphalt binder was tested at the beginning and at the end of fatigue. The samples of asphalt bitumen were tested by the method of ring and ball, determinativ of needle penetration, elastic recovery and resilince.
|
|
|
Usage of thin wearing courses with highly polymer modified bitumen
Renza, Jaroslav ; Rous, Vojtěch (referee) ; Dašek, Ondřej (advisor)
The diploma thesis deals with technology for the implementation and use of asphalt concrete for very thin layers (BBTM) with use of asphalt binder of high-polymer modification (HiMA). Further, there are described selected and performed functional tests. Thesis also contains design of a mixture for bituminous concrete type targeted for very thin layers with different types of binders. After a suitable design of the mixture, laboratory tests were carried out (stiffness modulus, resistance to permanent deformation, low temperature characteristics, water resistance and particle loss). The output of this work is a set of measured values and processed results with their interpretation.
|
|
|
New world experience with Asphalt-Rubber pavement
Jevínová, Alexandra ; Urbanec, Květoslav (referee) ; Kudrna, Jan (advisor)
The road infrastructure and the services provided in road transportation are inseparable part of everyday people´s life, improving economic development, competitiveness and social prosperity. Development of the road infrastructure is extensive process, both financially and technically, and in Czech and Slovak conditions it mostly depends on EU funds. In the recent years there is a great need for new approach of design and realization of the road projects in the selection of the most appropriate solution in feasibility study beginning in the project stage, continuing in realization, taking into account the possibilities of using all kinds of recycled material, which can otherwise end up in the landfills. One of the mentioned materials are also waste tires. The main goal of bachelor thesis is to verify the possibilities of application the waste tires in the road construction focusing on the technology of Crumb Rubber modified Bitumen using “wet process “(continuous blend).
|
|
|
Evaluation of properties of PMB containing binder from RAP
Měšťanová, Petra ; Hýzl, Petr (referee) ; Dašek, Ondřej (advisor)
Subject of this diploma thesis is to describe the effect of adding different amount of aged binder recovered from RAP on the change of properties of polymer modified bitumen. The RAP containing unmodified bitumen and the RAP where we can expect bitumen modification are used to recover binder. The binder obtained from RAP is dosed into the virgin binder in amount of 15 %, 30 % and 50 %. The methods of recycling of flexible pavements, extraction and regeneration of asphalt binders, rejuvenating of their properties and methods of empirical and functional laboratory tests are described in the theoretical part. The practical part deals with evaluating and comparison of the results mixed binders properties.
|
guest ::
